Multi-tool for Non invasive inspections
Termites and other pests are discovered without disturbance, allowing efficient treatments and reducing callbacks.
3 Tools in 1
- Precision-calibrated radar to detect termites and other insects Read more about Radar Sensor
- Dual mode Moisture sensor to zoom in on hidden moisture issues Read more about Moisture Sensor
- Thermal sensor highlights areas of differing temperature which warrant further investigation Read more about Thermal Sensor
Check out our product!
WHAT OUR CUSTOMERS SAY
Initially I used Termatrac as a gimmick to sell – “a sales tool”. I didn’t really care whether it worked or not as I thought I had all the relevant experience to detect termites myself.
Now I do not attempt ANY Termite job without using the Termatrac to its full potential. I can find point of entry a lot of the time, and importantly I often find active Termites when another pest control company has quoted before me and told the client that there was nothing there.
This week alone the Termatrac has won me 3 Termite eradications! In my opinion it is without doubt the best piece of technology developed for the pest control industry. I looked at thermal imaging camera’s at the same time, but so glad I went with the Termatrac.
I was asked by another pest control technician to use my Termatrac Termite Detection Radar on a house which had ongoing termite damage but they were unable to locate the activity. I started at the front door following each wall from the left. Termite activity was quickly located in the laundry area; however, the technician I was with was not convinced. With permission from the owner, he removed the wall lining, but activity was still not visible and he stuck a screwdriver into the bottom plate and it sounded solid.
As the Termatrac Termite Detection Radar was still showing movement and presence of termites in this location, he then used a crowbar and lifted the bottom plate which a single line of termites was located underneath. That was the best find of the year. I rate the Termatrac Termite Detection Radar 10 out of 10.
I use the Termatrac a lot more than my thermal imaging camera.
I’ve been using the Termatrac for two years now and can’t recommend it highly enough.
Finding the workings of termites can be difficult enough with floor coverings and inaccessible areas, but the Termatrac is able to not only show that the termites are active, but I can also trace their entry point.
Past or present activity is quickly determined, no guess work, no invasive procedures, it has certainly given me confidence when inspecting.
If any company is involved with termite work and baiting or dusting control methods, a Termatrac Termite Detection Radar is an invaluable tool in locating the area of most activity with the least disturbance to the foraging termites. It also allows you to check any suspect areas without invasive and damaging inspection methods. A very good tool to have in your termite treatment/inspection portfolio.
The Termatrac T3i is an awesome tool that every pest professional doing termite work needs to have in his toolbox… It’s quite amazing. If you’re a company trying to go green, you can pinpoint termites and use less Chemicals… If you’re looking for WOW factor for your company – THIS IS IT! It’s cutting-edge technology at its best. We are winning contract after contract. The phone is ringing off the hook. We are up about 50%. It has extended our season throughout the year. The best part is the bottom line – the T3i’s turned my business around!
The use of a Termatrac is not only good for the detection of termites but it has become an industry standard. So if there is a termite problem you should have been using it.
Removes the uncertainty
We use the Termatrac T3i every day to remove the uncertainty of concealed termite activity. Premise Inspections are Brisbane’s home building and pest inspection specialists. Know what you have got and what condition it’s in. From that you can make good asset decisions.
We were doing a job on a house that was brick below grade a couple of weeks a go and the customer wanted to know how far the infestation had gone so far. I started where we knew we had a problem and went left and right and found activity about 10-12 feet in both directions. We moved every 16 inches to each stud and found movement in about half of those studs we tested and finally stopped finding movement when we reached a window in one direction and a interior wall in the other direction. This was really helpful to my customer to know where he had to replace damage. sure enough when they tore the wall out the damage stopped where the movement stopped with Termatrac.
I have found termites with the Termatrac in several houses we’ve gone to inspect for new jobs and have sold about 90 percent of those jobs because i was able to show them where the problem was they were very impressed with the Termatrac. No one else that came to give an estimate had one.
I highly recommend this piece of equipment for locating termite infestations in homes that haven’t shown any visible signs of being there. We are in mobile AL. and deal with Formosan termites on a daily basis and the Termatrac has been a great asset to us .
Makes us confident
Termatrac has been so personalised in their attention. Extremely informative about the process, costs and recommendations and have made me feel very confident regarding the information we have received about our termite management plan.