dUAL MODE MOISTURE SENSOR
Direct Moisture Sensor & Relative Moisture Sensor
Termatrac’s Dual mode Moisture Sensor is exclusive in the market, incorporated solely in the T3i All Sensor along with the Radar Sensor and Thermal Sensor. The T3i Moisture Sensor enables the Operator to easily and accurately identify areas of high excess moisture. The T3i Dual Mode Moisture Sensor uses a capacitance based method to ascertain the moisture level beneath surfaces.
How the technology works?
The Moisture Sensor uses Omni-directional technology as it sets up an electric field to find the level of conductance in a material and hence reduce the level of moisture. T3i differs from the way it does its calculations and measurements compared to some other moisture meters in the market. Termatrac moisture technology sends a direct sensor out from the area within the moisture pad, not operating in an ark fashion of conductivity like most moisture meters.
The T3i Moisture Sensor penetrates up to 2.5” (60mm) deep into the material and extends out past the outer dimensions of the T3i Device, allowing for any moisture present under or around the T3i Device to be detected.
Direct Moisture Sensor

The Direct mode moisture sensor reads any slight increase or decrease in moisture content up to 2.5″ (60mm) within the walls surface using Omni-directional technology. It is designed to produce accurate readings even in extreme humidity caused by Environment, water features and structures.
The moisture reading is displayed on a dial with a percentage. Direct moisture sensor displays the absolute moisture value. Featured on the dual mode moisture sensor is the optional alarm feature. The feature alerts the operator when one of the 3 selected percentage thresholds are reached or has exceeded.
Key Information

01 Displays change in moisture across surface
02 Ability to produce real-time moisture data
03 Ability to choose reference point
04 Beneficial when finding boundaries of high moisture
05 Penetrates deeper – up to 2.5″ (60mm)
06 Accurate in extreme humidity
07 Durable and slidable moisture pad
08 Save T3i Data – Capture live stream moisture readings detected by T3i device.
Relative Moisture Sensor

The Relative mode moisture sensor detects any change in moisture beneath the walls surface from reference point. By simply sliding the moisture pad flush across the walls surface the data shows the relative difference (change) between two moisture points. This makes the relative sensor perfect in extreme conditions (heat, humidity, etc.). Operators have 100% flexibility to re-reference that moisture sensor at any time. Blue indicates more moisture and red indicates less moisture. Operators can utilize the relative mode to find areas of moisture that are conclusive of termite activity by searching for abnormal changes in the level of moisture across the surface.
The relative sensor accurately identifies the difference in moisture levels on most surfaces, including wood, drywall, roofing, plaster, brick, concrete, etc. Also, the specifically designed moisture padding ensures no marks occur on the tested surface areas when scanning for moisture.
Key Information

01 Displays change in moisture across surface
02 Ability to produce real-time moisture data
03 Ability to choose reference point
04 Beneficial when finding boundaries of high moisture
05 Penetrates deeper – up to 2.5″ (60mm)
06 Accurate in extreme humidity
07 Durable and slidable moisture pad
08 Save T3i Data – Capture live stream moisture readings detected by T3i device.
